Netgear EX6130 Setup

It takes little time or effort to set up your Netgear EX6130 extender setup. To use it, just put it into an electrical socket close to your router, join its WiFi network, and use a web browser to follow the directions shown on the screen. You may have expanded WiFi coverage in your house or place of business in a matter of minutes, ensuring a dependable and robust connection anyplace.

Netgear EX6130 Setup

Netgear EX6130 Extender Setup | WPS Method

Netgear EX6130 WiFi Extender Setup | Manual Method

  • Once the Netgear EX6130 extender is plugged in, watch for the power LED to solidify.
  • WPS button pressed.
  • Click the WPS button for two minutes.
  • Hold off until the extender’s WPS LED solidifies, signifying a successful connection.
  • When you have a dual-band router, duplicate steps 2-4.
  • Link the devices that you have WiFi enabled to the expanded network.
  • Place the extender so that it is as close to your router as possible.
  • Your Netgear EX6130 will provide you with increased WiFi coverage.


  • Close to your router, plug in the Netgear EX6130 extender.
  • Link your PC to the WiFi network of the extender.
  • Put setup into the address bar of an open web browser.
  • To link the extender to your current WiFi network, follow the setup steps displayed on the screen.
  • After connecting, move the extension to the best spot.
  • Link your devices to the WiFi network that is extended.
  • Make the most of your Netgear EX6130 extender improve WiFi coverage.


Note: If you need any assistance regarding your Netgear wifi extender, get in touch with us via the chat button you see on the bottom right corner of this page.

Netgear EX6130 WiFi Range Extender | Firmware Update

  • Link the Netgear EX6130 extender to your PC.
  • Put setup into the address bar of an open web browser.
  • Enter the credentials from your extender to log in.
  • Select Settings or Administration.
  • To update the software, select Firmware Updates and follow to the on-screen directions.
  • For updates to take effect, restart the extender.
Netgear EX6130 Extender Setup

How do I login to the Netgear EX6130?

Netgear EX6130 | Reset Process

  • Use a device to establish a WiFi connection with the Netgear EX6130.
  • In the URL bar of an open internet browser, type setup.
  • Put the password and username here.
  • To view the extender settings, click Log In.
  • Adjust the parameters as necessary.
  • When you’re done, log out.


  1. Find the Netgear EX6130’s reset button.
  2. Hold down the reset button for five to ten seconds.
  3. If the power LED begins to blink, release the button.
  4. Wait for the extender’s restart and reset.
  5. Using a device, join the default WiFi network.
  6. Reconfigure the extender by following the first setup instructions.